Pond Pro QuikClear Flocculent - 1kg Jar Pond Pro QuikClear Flocculent is an easy to apply turbidity treatment recommended to clarify murky water caused by suspended particles, tannins or organic material. This Product Also Works To Bind Up Phosphates (Food For Plants & Algae) Making It Unavailable. With Aeration, This Product Continues To Make Phosphates Unavailable For Up To Two Years. Important to note. - Tannins are cleared up almost instantly. - organic matter from fish waste etc can take up to 3 or 4 weeks. - Phosphates will appear as white floc that may float. Benefits Rapidly clarifies murky water (1-3 hours!) Preventative treatment against unwanted algae & vegetation Aids filtration Reduces phosphates Encourage debris & organics to settle on bottom Bind & clear dissolved organics Lowers pH for irrigation Applications Ponds & Lakes Dugouts Drinking water reservoirs Aquaculture Irrigation Ponds Golf Courses & Residential Developments Product Features Safe for plants, livestock, wildlife Easy, DIY application Economical Dry powder or liquid available Powder: 1kg, 5kg, 10 kg or 18 kg Liquid: 1L Application Rates Dry Powder: Apply 1/2 cup per every 1000 gallons (3780 liters) of pond water WARNING: Eye protection and proper fitting dust mask should be worn during application NOTE: Our application rates are conservative to ensure safety of aquatic life. If desired results are not initially achieved, treatment can be repeated every 3 days until satisfied with results Application instructions: Liquid: For best results, dilute flocculent with pond water (8L per 30ml dose) and apply final solution to pond edges. If needed, repeat application 24 hours later. Dry: Powdered flocculent can be sprinkled as a powder on surface or through waterfall. Ensure floc is able to circulate through the pond with aeration, waterfalls or circulators. For difficult ponds, the treatment can be repeated every 72 hours until the desired results are achieved. Water will initially turn a milky white but should be clear by the next day. IF APPLYING TO FISH PONDS: Note that pH of water in fish ponds should be between 6.5 & 8.2. MIXING FLOC WITH WATER AT A pH OF 8.2 OR HIGHER CAN BE TOXIC TO FISH